Rubber Tubing / Sleeves are long hollow cylinders manufactured by rubber extrusion. They are generally used for Liquid Transfer, Insulation, Gasketing or Gas Transfer. We also offer tubing designed for:

High Heat Gasketing/Seals: Usable upto 250 Degree Celsius
Food Grade Applications: For Transfer of Drinking Water / Juices etc. (FDA/BgVV/USP Class VI/WRAS Compliant)
Medical/ Pharmaceutical Applications: For Blood Transfusion etc. (BgVV/USP Class VI/FDA Compliant)
Liquid Transfer: For Transfer of Oil / Fuel / Acid.
Electrical Insulation: Dielectric Strength upto 32 kv/mm

Choice of Elastomers:

• Silicone Rubber
• Silicone Rubber Sponge
• EPDM Rubber
• EPDM Rubber Sponge
• Nitrile Rubber
• Viton® (Fluoroelastomer)

Sizes offered

• From 1 mm - 40 mm ID. Any Wall Thickness. Larger sizes can be made against order.
   
• Rang of Hardness (Shore A)
• 40 Shore A to 90 Shore A
   

Colours Offered

• Standard: Transparent, Translucent, Black, Red, White and Grey.
• Customized Colours can also be offered against order.

We manufacture over 500 different types or Rubber Profiles / Channels / Extrusions. We can also manufacture the channels as per customer drawings and customized requirements. We also offer specialised Profiles / Channels for
 

Excellent Weather / UV resistance: For long product life
Ultra Low Compression Set: For IP65, IP66, IP67 levels of Water Protection.
High Heat Resistance: Usable up to 250 Degree Celsius
Oil / Fuel / Acid Resistance: For use in extreme conditions
Food Grade Applications: FDA/BgVV/USP Class VI/WRAS Compliant
Electrical Insulation: Dielectric Strength upto 32 kv/mm

Choice of Elastomers:

• Silicone Rubber
• Silicone Rubber Sponge
• EPDM Rubber
• EPDM Rubber Sponge
• Nitrile Rubber
• Viton® (Fluroelastomer)

Sizes offered

• Upto 75 mm CS. Larger sizes can be made against order.
•  
• Range of Hardness (Shore A)
• 35 Shore A to 90 Shore A

Colours Offered

• Standard:Transparent, Translucent, Black, Red, White and Grey.
• Customized Colours can also be offered against order.

Manufacturing Process

Rubber Profiles / Channels are manufactured in our state-of-the-art Cold Feed Extruders and Continuous Vulcanization Extrusion Lines. The entire setup is fully automated and computer controlled, which enables us to deliver

Very Accurate Dimensions: Computerized controls of the machine enable us to offer our customer excellent dimensional accuracy in the material.
Uniform Vulcanization / Curing of the Material: Since Vulcanization / Curing is being done as a continuous process rather than in a batch process, the material quality is better and more consistent. 
Excellent Surface Finish: We offer excellent surface finish in the Profiles / Channels.
Bend-less Extrusions: Due to the continuous curing process, the material is absolutely straight, without any bend, twist in the Profiles / Channels. This increases ease of fitment.

We manufacture over 300 different sizes of Rubber Washers. We also manufacture Rubber Washers as per our customer’s sizes/drawings and customized technical requirements.

We offer Washers specially compounded for

• Excellent Weather / UV resistance: For long product life
• Ultra Low Compression Set: For IP65, IP66, IP67 levels of Protection.
• High Heat Resistance: Usable up to 250 Degree Celsius
• Oil / Fuel / Acid Resistance: For use in extreme conditions
• Fire Resistance: Self Extinguishing Washers for Fire Safety/Low Flammability
• Food Grade Applications: FDA/BgVV/USP Class VI/WRAS Compliant
• Electrical Insulation: Dielectric Strength upto 32 kv/mm

Choice of Elastomers:

• Silicone Rubber
• Silicone Rubber Sponge
• EPDM Rubber
• EPDM Rubber Sponge
• Viton® (Fluroelastomer)
• Neoprene Rubber
• Nitrile Rubber
• Nitrile / PVC Rubber
• Natural Rubber

Sizes offered

• Moulded: Up to 1000 mm Max.
•  
• Range of Hardness (Shore A)
• 35 Shore A to 90 Shore A

Colours Offered

• Standard: Transparent, Translucent, Black, Red, White and Grey.
• Customized Colours can also be offered against order.

Manufacturing Process

• Rubber Washers are manufactured by compression moulding in our Automatic Hydraulic Compression Moulding Presses.
• Along with our in-house tool room, and highly experienced manufacturing team, our range of Moulding machines enable us to deliver:
• Uniform Vulcanization / Curing of the Material: All parameters (like pressure, temperature and vulcanization time) are automatically controlled.
• Excellent Dimensional Accuracy: We offer high dimensional accuracy in the rubber washers.
• Huge range of designs and sizes: We offer rubber washers in sizes ranging from 5 mm to 1000 mm   

An O-ring is a torus, or doughnut-shaped ring moulded from rubber/elastomer. We manufacture over 4000 different sizes of O Rings. We also manufacture O Rings as per our customer’s sizes and customized technical requirements. Our O Rings can be specially compounded for

• Ultra Low Compression Set: For IP65, IP66, IP67 levels of Protection.
• High Heat Resistance: Usable up to 250 Degree Celsius
• Oil / Fuel / Acid Resistance: For use in extreme conditions
• Food Grade Applications: FDA/BgVV/USP Class VI/WRAS Compliant
• Excellent Weather / UV resistance: For long product life
• Electrical Insulation: Dielectric Strength up to 32 kv/mm
• Fire Resistance: Self Extinguishing O Rings for Fire Safety/Low Flammability

Choice of Elastomers:

• Silicone Rubber
• Silicone Rubber Sponge
• EPDM Rubber
• EPDM Rubber Sponge
• Viton® (Fluroelastomer)
• Neoprene Rubber
• Nitrile Rubber
• Nitrile / PVC Rubber
• Natural Rubber

Sizes offered

• Moulded: From 2 mm to 1000 mm. Larger sizes can be manufactured with single moulded joint
•  
• Range of Hardness (Shore A)
• 30 Shore A to 95 Shore A

Colours Offered

• Standard:Transparent, Translucent, Black, Red, White and Grey.
• Customized Colours can also be offered against order.

Manufacturing Process

• We manufacture O-Rings by compression moulding in our Automatic Hydraulic Compression Moulding Presses.
• Along with our in-house tool room, and highly experienced manufacturing team, our range of Moulding machines enable us to deliver:
• Uniform Vulcanization / Curing of the Material: All parameters (like pressure, temperature and vulcanization time) are automatically controlled.
• Excellent Dimensional Accuracy & Finish: We offer high dimensional accuracy in our Moulded O Rings
• Huge range of sizes: We can offer our O Rings in a huge variety of sizes.  

Rubber Cords are round cross-sectioned extrusions which are generally used for gasketing and often joined end-to-end to make O Rings.
We offer specially made rubber cords for

• Ultra Low Compression Set: For IP65, IP66, IP67 levels of Protection.
• High Heat Resistance: Usable up to 250 Degree Celsius
• Oil / Fuel / Acid Resistance: For use in extreme conditions
• Excellent Weather / UV resistance: For long product life
• Fire Resistance: Self Extinguishing Cords for Fire Safety/Low Flammability
• Food Grade Applications: FDA/BgVV/USP Class VI/WRAS Compliant

Choice of Elastomers:

• Silicone Rubber
• Silicone Rubber Sponge
• EPDM Rubber
• EPDM Rubber Sponge
• Nitrile Rubber
• Viton® (Fluoroelastomer)

Sizes offered

• From 1 mm - 50 mm OD. Larger sizes can be made against order.
• Range of Hardness (Shore A)
• 35 Shore A to 90 Shore A

Colours Offered

• Standard: Transparent, Translucent, Black, Red, White and Grey.
• Customized Colours can also be offered against order.

Manufacturing Process

• We manufacture Rubber Cords in our state-of-the-art Cold Feed Extruders and Continuous Vulcanization Extrusion Lines. The entire setup is fully automated and computer controlled, which enables us to deliver:
• Very Accurate Dimensions: Computerized controls of the machine enable us to offer our customer excellent dimensional accuracy in the material
• Uniform Vulcanization / Curing of the Material: Since Vulcanization / Curing is being done as a continuous process rather than in a batch process, the material quality is better and more consistent. 
• Excellent Surface Finish: We offer excellent surface finish in the Cord.
• Bend-less Extrusions: Due to the continuous curing process, the material is absolutely straight, without any bend, twist in the Cord. This increases ease of fitment.

Sponge Gaskets are usually used to fill the space between two or more highly irregular mating surfaces, generally to prevent leakage from or into the joined objects while under compression.

We manufacture over 500 different types of Sponge Rubber Gaskets. We can also manufacture sponge gaskets as per our customer sizes/drawings and customized technical requirements.

Sponge rubber, also called "expanded" or "cellular" rubber, is manufactured by including a gas-forming ingredient (blowing agent) in the rubber formulation. As the rubber vulcanises, it reaches a temperature at which the blowing agent decomposes and gas bubbles form, creating individual cell structures in the rubber. This is followed by a curing until vulcanization is complete. The vulcanization process preserves the cell structure formed by the gas in the interior of the component. This makes the final gasket softer, easier to compress and lighter in weight. Hence sponge gaskets require much lesser force to compress as compared to solid rubber gaskets.

Sponge Rubber gaskets can be specially compounded for:

• Excellent Weather / UV resistance: For long product life
• Ultra Low Compression Set: For IP65, IP66, IP67 levels of Protection.
• High Heat Resistance: Usable up to 250 Degree Celsius
• Food Grade Applications: FDA/BgVV/USP Class VI/WRAS Compliant

Choice of Elastomers:

• Silicone Rubber Sponge
• EPDM Rubber Sponge

Sizes offered

• Moulded: Up to 1000 mm Max.
• Extruded: Up to 75 mm CS. Larger sizes can be made against order.

Colours Offered

• Standard: Black, White and Grey.
• Customized Colours can also be offered against order.

Manufacturing Process

• The Sponge Rubber Gaskets are manufactured by Extrusion / Moulding / Extrusion + Moulding, depending on the design and specifications of the requirements

Extruded Sponge Gaskets

• We manufacture extruded sponge gaskets in our state-of-the-art Cold Feed Extruders and Continuous Vulcanization Extrusion Lines. The entire setup is fully automated and computer controlled, which enables us to deliver:

Very Accurate Dimensions: Computerized controls of the machine enable us to offer our customer excellent dimensional accuracy in the material.
Uniform Vulcanization / Curing of the Material: Since Vulcanization / Curing is being done as a continuous process rather than in a batch process, the material quality is better and more consistent. 
Excellent Surface Finish: We offer excellent surface finish in the Gaskets
Bend-less Extrusions: Due to the continuous curing process, the material is absolutely straight, without any bend, twist in the Gaskets. This increases ease of fitment.

Moulded Gaskets

Moulded sponge gaskets are manufactured by compression moulding in our Automatic Hydraulic Compression Moulding Presses.

Along with our in-house tool room, and highly experienced manufacturing team, our range of Moulding machines enable us to deliver:

Uniform Vulcanization / Curing of the Material: All parameters (like pressure, temperature and vulcanization time) are automatically controlled.
Excellent Dimensional Accuracy: We offer high dimensional accuracy in our Moulded Sponge Gaskets
Huge range of designs and sizes: We offer gaskets in a huge variety of designs/sizes.   

Rubber Seals are used to fill the space between two or more irregular / imperfect mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Some of these seals include a hollow section which requires much lesser force to compress as compared to solid gaskets / cords.

We manufacture over many different types of rubber seals depending of the fitment area and fitment method which is used by the customer. These seals are named after letters of the alphabet which resemble their basic shape. The usual seals are A Type, P Type, D Type, DU Type, L Type and U Type.

We also manufacture Seals as per our customer sizes/drawings and customized technical requirements. We offer Seals specially compounded for:

• Excellent Weather / UV resistance: For long product life
• Ultra Low Compression Set: For IP65, IP66, IP67 levels of Protection.
• High Heat Resistance: Usable up to 250 Degree Celsius
• Oil / Fuel / Acid Resistance: For use in extreme conditions
• Fire Resistance: Self Extinguishing Seals for Fire Safety/Low Flammability
• Food Grade Applications: FDA/BgVV/USP Class VI/WRAS Compliant

We manufacture the following kinds of Silicone Rubber Tops for Carbon Brushes in Traction Motor applications

• All-Rubber Silicone Rubber Tops
• Bakelite Sheet bonded Silicone Rubber Tops
• Bakelite Moulding bonded Silicone Rubber Tops
• Glass Fibre Sheet bonded Silicone Rubber Tops

Our Silicone Rubber Tops easily surpass RDSO Specification NO. RDSO/M and C/ RP-130 and are specially compounded for

• Ultra Low Compression Set
• High Heat Resistance
• Long Service Life

Rangeof Hardness (Shore A)

• 65 Shore A to 75 Shore A

Colours Offered

• Standard: Red, Green.
• Customized Colours can also be offered against order.

Manufacturing Process

• Silicone Rubber Tops are manufactured by compression moulding in our Automatic Hydraulic Compression Moulding Presses.
• Along with our in-house tool room, and highly experienced manufacturing team, our range of Moulding machines enable us to deliver:
• Uniform Vulcanization / Curing of the Material: All parameters (like pressure, temperature and vulcanization time) are automatically controlled.
• Excellent Dimensional Accuracy & Finish: We offer high dimensional accuracy in our Silicone Rubber Tops
• Huge range of sizes: We can offer our moulded Silicone Rubber Tops in many standard/non standard sizes.

We make the follow kinds of Rubber Pads

Vibration Isolation Pads / Feet

Vibration Isolation pads are used as interfaces between two parts, damping the energy and vibration between the two. These pads separate the faces of two objects while allowing a certain amount of movement. The vibration pads when installed reduce noise, vibration and harshness, prolonging machine life and improving the work environment. We also offer metal/screw bonded pads for easy fitment and height adjustment.

The Vibration Isolation pads are specifically compounded to suit specific customer requirements, like vibration frequency, weight of machine, and other external factors which the pad has to overcome.

Silicone Rubber Pads

Silicone Rubber Pads are generally manufactured in ultra low hardness and used in printing machine applications. Our pad compounds are customized for long service life.

Choice of Elastomers:

• Silicone Rubber
• EPDM Rubber
• Viton® (Fluroelastomer)
• Neoprene Rubber
• Nitrile Rubber
• Natural Rubber

Sizes offered

Up to 950 mm Max.

Range of Hardness (Shore A)

10 Shore A to 90 Shore A

Colours Offered

• Standard: Black, Red and Grey.
• Customized Colours can also be offered against order.

Manufacturing Process

Rubber pads are manufactured by compression moulding in our Automatic Hydraulic Compression Moulding Presses

Along with our in-house tool room, and highly experienced manufacturing team, our range of Moulding machines enable us to deliver:

Uniform Vulcanization / Curing of the Material: All parameters (like pressure, temperature and vulcanization time) are automatically controlled.
Excellent Dimensional Accuracy: We offer high dimensional accuracy in the rubber pads.

Huge range of designs and sizes: We offer rubber pads in a huge variety of designs/sizes.

Pipe Joint Gaskets are mechanical seals which fill the space between two pipes / flanges, creating a seal which is long lasting and water tight.

We manufacture the following types of Pipe Joint gaskets:

Mechanical Joint and Transition Joint Type
C Type / Groove Coupler Type Gasket
Flat Type (For Flange Sealing)
Ring Type Gasket
Push On Type

We also offer gaskets specially compounded for:

• Food Grade / Potable Water Applications: ANSI/NSF/FDA/WRAS Compliant
• Excellent Weather / UV resistance: For long product life
• Ultra Low Compression Set: For long leak free service life
• Chloramine Resistance: For long service life
• Oil / Fuel / Acid Resistance: For use in extreme conditions
• High Heat Resistance: Usable up to 250 Degree Celsius
• Fire Resistance: Self Extinguishing Gaskets for Fire Safety/Low Flammability

Along with offering the above components in NEW form, we also offer Re – Rubberisation, Repair, Re Furbishing and Balancing services. The old material is picked up from the customer’s works. The old used rubber compound is removed from the C.I. and fresh high quality rubber is bonded with the metal. Axles, Bushes, Bearings, Flanges are checked for wear and tear and replaced if necessary with new parts. Balancing/Surface Grinding is done as per customer requirements. The old parts are returned to the customer along with the repaired/refurbished component. 
 

Choice of Compounds:
 

• Standard Quality – Fair Compression Set, Abrasion Resistant, Good Product Life
• Special Quality – Low compression set, Abrasion Resistant, Better Product Life.
• Supreme Quality – Very low compression set, Highest Strength, Abrasion Resistant, Anti Static and Longest Product Life.
• Super Special Quality – Ultra low compression set, Abrasion Resistant, Anti Static and Excellent Product Life.
   

Range of Hardness (Shore A)
 

• 80 Shore A to 92 Shore A
   

Colours Offered
 

• Standard: Black, Red and Yellow.
• Customized Colours can also be offered against order.
   

Manufacturing Process
 

Jute Mills Rubber components are manufactured by compression moulding in our Automatic Hydraulic Compression Moulding Presses.

Along with our in-house tool room, and highly experienced manufacturing team, our range of Moulding machines enable us to deliver:

Uniform Vulcanization / Curing of the Material: All parameters (like pressure, temperature and vulcanization time) are automatically controlled.
Excellent Dimensional Accuracy: We offer high dimensional accuracy in the all jute mill components.
Huge range of designs and sizes: We offer jute mill components in a huge variety.

Our specially compounded Silicone Rubber Strips are specially made for packing/sealing machine applications. They are also sold under our brand name “VINSA”.

Our Silicone Rubber Strips are specially compounded for

Ultra Low Compression Set
High Heat Resistance
Long Service Life

Sizes offered

• 19 mm x 5 mm x 205 mm
• 18 mm x 5 mm x 205 mm
• 19 mm x 4 mm x 205 mm
• 18 mm x 4 mm x 205 mm
• Other non standard sizes also offered

Range of Hardness (Shore A)

• 60 Shore A to 70 Shore A

Colours Offered

• Standard: Red, White and Grey.
• Customized Colours can also be offered against order.

Manufacturing Process

• Silicone Rubber Strips are manufactured by compression moulding in our Automatic Hydraulic Compression Moulding Presses.
•  
• Along with our in-house tool room, and highly experienced manufacturing team, our range of Moulding machines enable us to deliver
•  
• Uniform Vulcanization / Curing of the Material: All parameters (like pressure, temperature and vulcanization time) are automatically controlled.
• Excellent Dimensional Accuracy & Finish: We offer high dimensional accuracy in our Silicone Rubber Strips
• Huge range of sizes: We can offer our moulded Silicone Rubber Strips in many standard/non standard sizes